Drawing · 5182-C
Square bar / SS304 / satin brushed
5182 square pull handle
A square-profile commercial pull handle with a 600 mm overall length and 575 mm fixing centres. Satin-brushed SS304, for the shown arrangement on doors up to 50 mm thick.
Pull handles / 5182
5182 product views from the visible 5182-C sheet.
600 mmOverall length
575 mmFixing centres
SS304Satin-brushed stainless
Product architecture
Square bar & SS304 & satin brushed
A straight, square-profile alternative to the rounded 5180 and curved 5181. The mounting centres are 575 mm, not the 600 mm overall handle length.
01
Square geometry
A straight bar and angular returns form the handle.
02
Separate dimensions
Overall length and fixing centres are both shown explicitly on the drawing.
03
Through-door arrangement
The sheet lists two M8 stainless fasteners and a maximum door thickness of 50 mm.
Technical data
Specify the configuration.
Product data is taken from the visible, linked CiiLOCK technical sheet. Check the full drawing and fixing arrangement before ordering or fabrication.
Check an application- Part number
- 5182-071
- Overall length
- 600 mm
- Fixing centres
- 575 mm
- Profile shape
- Square
- Projection shown
- 73 mm
- Door thickness
- Up to 50 mm
- Material / finish
- SS304 / satin brushed
- Fasteners listed
- 2 × M8, stainless steel
Before specification
Use the 575 mm fixing centres for application planning; do not substitute the overall handle length.
Confirm the complete fixing arrangement and required clearances before preparation.
Original CiiLOCK technical sheets
Drawings for 5182.
View or download the supplied PDFs. Check the complete sheet, revision and application before fabrication. Use the separately linked installation guide where provided; contact CiiLOCK for additional CAD or application support.
Related hardware
Build around the application.
Pull handles
5180 D-shaped pull handle
A rounded D-shaped commercial pull handle with a 32 mm diameter section. The drawing describes a nominal 300 mm handle and shows 332 mm overall height.
D-shaped / SS304 / satin brushedExplore 5180
Pull handles
5181 curved pull handle
A gently curved pull handle with a 32 mm diameter section, 600 mm fixing centres and 632 mm overall length. The supplied fixing arrangement suits doors 30–60 mm thick.
Curved bar / SS304 / satin brushedExplore 5181
VIALLA Doorware
VIALLA 5278 hook-return handle
Developed for people with limited grip or hand function. The returned lever end is intended to help maintain contact when operating the latch without a conventional grip.
Accessibility-focused / push-button snibExplore 5278Application support
Check the details with CiiLOCK.
Include the product code, panel size and mass, profile details and the required operation.