D-shaped / SS304 / satin brushed

5180 D-shaped pull handle

A rounded D-shaped commercial pull handle with a 32 mm diameter section. The drawing describes a nominal 300 mm handle and shows 332 mm overall height.

View technical drawings Enquire about 5180

Pull handles / 5180

The actual 5180 D-shaped pull handle in two views.

Enlarge

5180 product views from the visible 5180-C sheet.

332 mmOverall height

SS304Satin-brushed stainless

50 mmMaximum door thickness

Product architecture

D-shaped & SS304 & satin brushed

A standalone pull handle for the contact side of a door. It does not operate a latch or replace the selection of a suitable locking system.

Rounded section

A 32 mm diameter section and D-shaped return are shown on the released drawing.

Brushed stainless

SS304 construction with a satin-brushed finish.

Check the fixing

The sheet lists two M8 stainless fasteners and doors up to 50 mm thick.

Technical data

Specify the configuration.

Product data is taken from the visible, linked CiiLOCK technical sheet. Check the full drawing and fixing arrangement before ordering or fabrication.

Check an application

Part number: 5180-071
Drawing description: Commercial Pull Handle 300 mm
Overall height: 332 mm
Section diameter: 32 mm
Horizontal envelope shown: 126 mm
Projection shown: 76 mm
Door thickness: Up to 50 mm
Material / finish: SS304 / satin brushed
Fasteners listed: 2 × M8, stainless steel

Before specification

300 mm is the description on the drawing; it is not the 332 mm overall dimension. Use the dimensioned sheet for preparation.

No accessibility certification or lock-body compatibility is established by this pull-handle drawing.

Original CiiLOCK technical sheets

Drawings for 5180.

View or download the supplied PDFs. Check the complete sheet, revision and application before fabrication. Use the separately linked installation guide where provided; contact CiiLOCK for additional CAD or application support.