Adjustable hinges
Aluminium Euro Hinge 4670
A clampable 3D hinge for compatible aluminium C-groove profiles. Independent correction in height, width and compression, with published configurations up to 150 kg.
3D adjustable / C-grooveExplore 4670The PIVOTRON range
Every door starts with the right hardware.
Select door hardware by function: standard hinges, 3D adjustable hinges, concealed pivots, VIALLA Doorware and architectural pull handles.
18 products
Looking for a drawing?
Adjustable hinges
Trinity 4414
Three-direction adjustment contained within a direct screw-fixed hinge. For conventional aluminium systems without a clampable C-groove.
3D adjustable / direct-fix / lift-offExplore 4414
Concealed pivots
Pivotron 4131
A concealed pivot hinge set with height and width adjustment. The current 4131-021 configuration has a 0 mm offset and a published 100 kg load.
2D concealed pivot / 0 mm offsetExplore 4131
Standard hinges
Interfold 4402
A stainless steel Interfold hinge family for conventional timber and aluminium interfaces. Hinge quantity and panel size must be selected from the same published configuration.
Stainless steel / fast-fixExplore 4402
Standard hinges
Mortice butt hinges 4404 / 4405
Two stainless steel butt-hinge formats with fixed stainless pins: 100 × 75 mm and 100 × 100 mm, both with 2.5 mm leaves.
Stainless steel / fixed pinExplore 4404-4405
Standard hinges
Double Fix 4408
An aluminium wrap-around hinge with dual fixing to the door and frame. Published 100 kg configurations use different hinge quantities as the panel size increases.
Aluminium / wrap-around face-fixExplore 4408
Standard hinges
Stainless lift-off hinge 4106
An established stainless steel lift-off hinge in the PIVOTRON range. Contact CiiLOCK for current technical details and application confirmation.
Conventional / lift-offExplore 4106
VIALLA Doorware
VIALLA 5192 handle
The established VIALLA handle family with lift-to-lock operation, nylon bushings, a large internal snib and reversible handing.
Lift-to-lock / conventional snibExplore 5192
VIALLA Doorware
VIALLA 5271 handle
Push-button VIALLA furniture for the 5273 lock platform. The conventional lever alternative to the hook-return 5278.
Push-button snib / conventional leverExplore 5271
VIALLA Doorware
VIALLA 5278 hook-return handle
Developed for people with limited grip or hand function. The returned lever end is intended to help maintain contact when operating the latch without a conventional grip.
Accessibility-focused / push-button snibExplore 5278
VIALLA Doorware
VIALLA 5273 French Door Lock
A face- or flush-mounted lock platform with SS304 latch/bolt on 5273-071 and 5273-072, selected push-button furniture and separately supplied multipoint hardware.
Current lock platform / face or flushExplore 5273
VIALLA Doorware
VIALLA 5173 projection lock
The established VIALLA projection-lock platform remains relevant where its footprint and operating architecture suit the application. This range presents the 5173-021 face-mounted version.
Established platform / face mountExplore 5173
VIALLA Doorware
VIALLA 5189 multipoint bolt kit
Separately supplied multipoint bolt hardware for compatible CiiLOCK lock platforms, including 5173 and 5273. The released sheet lists three rods per set and a maximum length of 3.6 m.
Three-rod kit / supplied separatelyExplore 5189
Pull handles
5180 D-shaped pull handle
A rounded D-shaped commercial pull handle with a 32 mm diameter section. The drawing describes a nominal 300 mm handle and shows 332 mm overall height.
D-shaped / SS304 / satin brushedExplore 5180
Pull handles
5181 curved pull handle
A gently curved pull handle with a 32 mm diameter section, 600 mm fixing centres and 632 mm overall length. The supplied fixing arrangement suits doors 30–60 mm thick.
Curved bar / SS304 / satin brushedExplore 5181
Pull handles
5182 square pull handle
A square-profile commercial pull handle with a 600 mm overall length and 575 mm fixing centres. Satin-brushed SS304, for the shown arrangement on doors up to 50 mm thick.
Square bar / SS304 / satin brushedExplore 5182
VIALLA Doorware
1505-KA 60 mm cylinder
A 60 mm, five-pin double cylinder barrel with a loose 0–135° cam. Explicitly listed as a cylinder option on the 5273 lock drawing.
Cylinder accessory / 135° loose camExplore 1505
VIALLA Doorware
1532-KA 70 mm cylinder
A 70 mm, five-pin brass lock cylinder with a chrome finish and loose 0–135° cam. Explicitly listed as a cylinder option on the 5273 lock drawing.
Cylinder accessory / 135° loose camExplore 1532No matching products.
Try a product code, another search term or clear the filters.
Application support
Make the right connection.
Send the product code and door-system details to your nearest CiiLOCK team.