Stainless steel / fixed pin

Mortice butt hinges 4404 / 4405

Two stainless steel butt-hinge formats with fixed stainless pins: 100 × 75 mm and 100 × 100 mm, both with 2.5 mm leaves.

View technical drawings Enquire about 4404-4405

Standard hinges / 4404-4405

4404 stainless steel butt hinge, open and angled views.

Enlarge

4404 product render extracted from 4404-C.

100 × 754404 size, mm

100 × 1004405 size, mm

2.5 mmLeaf thickness

Product architecture

Stainless steel & fixed pin

For conventional mortice preparation where a fixed-pin butt-hinge format suits the door and frame. Choose the leaf width from the fixing and profile requirements.

Two leaf widths

4404-10 is 75 mm wide; 4405-10 is 100 mm wide.

Fixed stainless pin

Both supplied drawings identify a fixed stainless steel pin.

Application review

No load rating is stated on these sheets. Confirm hinge quantity and fixing for the proposed door.

Technical data

Specify the configuration.

Dimensions and configurations are from the linked CiiLOCK drawing. Check the drawing and application before fabrication.

Check an application

4404-10: 100 × 75 × 2.5 mm
4405-10: 100 × 100 × 2.5 mm
Material: Stainless steel
Pin: Fixed stainless steel
Pin diameter: 7 mm
Knuckle diameter: 12 mm

Before specification

Bearing type and load rating are not specified in the supplied sheets. Confirm the required application with CiiLOCK.

Original CiiLOCK technical sheets

Drawings for 4404-4405.

View or download the supplied PDFs. Check the complete sheet, revision and application before fabrication. Use the separately linked installation guide where provided; contact CiiLOCK for additional CAD or application support.